HOMEABOUT ISTAMEMBERSHIPTECHNICAL COMMITTEESACCREDITATIONPUBLICATIONSSEED TESTING LINKS
 
 
 
TCOMs / GER / Tools
 
 
 
  Germination Tool Box        
  Activity Report | Documents | Tool Box | Working Programme | Workshops
 
Rounding Procedure
Presentation of the "Rounding programme"
The following Excel file contains a computer programme in order to round the results of germination test.
The procedure included in this program is in accordance with the prescriptions of ISTA Rules (Chapter 5, 5.8.A)

The "Rounding programme"

Click on the link below to download the rounding programme
  Download the rounding programme (158 KB)
People involved in the project
Jean-Claude Lalande, Sylvain Grégoire, Joël Léchappé, Sylvie Ducournau, Valérie Blouin, Philippe Garreau, Pierre Soufflet (France)
  Download Germination Rounding Procedure (article published in Seed Testing International No. 130, October 2005) (57 KB)

Calculation of Water Retention of Germination Media
Presentation of the "Water Retention Calculation Programme"
The following Excel file contains a computer programme in order to calculate the water retention of germination media.
The procedure included in this programme is in accordance with the guidance given in the ISTA Handbook on Seedling Evaluation (Appendix 5: A5.3 Germination Procedures - Growing Media Specification Checks - Water Retention).  

The "Water Retention Calculation Programme"
Click on the link below to download the rounding programme
  Download the water retention calculation programme (44 KB)
People involved in the project
Ronald Don, Sylvie Ducournau, Joël Léchappé, Gillian McLaren

Tolerance and Confidence Interval Calculator for Germination Tests

Presentation of the Tolerance and Confidence Interval Calculator
The following Excel file contains a computer programme that calculates: tolerances of germination test replicates; repeat germination tests carried out in one laboratory; and repeat germination tests carried out in different laboratories.  Confidence intervals for germination test results can also be calculated using this tool. The calculations carried out by this programme are in accordance with those developed and published by Miles 1963 and published in the “Handbook of tolerances and measures of precision for seed testingProceedings of the International Seed Testing Association, 28, 525-686.  

The Excel file contains 3 worksheets: Germ Tol - 1 lab;  Germ Tol -different labs; and CI for Germ   


Worksheet 1: Germ Tol 1 lab. 
This should be used for the calculation of tolerances for replicates and repeat tests carried out in one laboratory. To use the worksheet enter the number of tests or replicates, the number of seed per test or replicate and the average germination which will be rounded down automatically  to the nearest whole number for values below x.5 and rounded up automatically for values above or equal to x.5.   

For example:  

A.   If we conduct a 400 seed germination test  and obtain the following results for the four replicates:
The average is 94.25.  We enter 4 (# of tests or replicates); 100 (#of seed/test or replicate); and 94.25 (Average germination) into the calculator.  The Reported germination is 94 and the Maximum range is calculated by the worksheet as 10.Since the maximum difference between replicate results is only 4 the results are in tolerance.

B.   If we conduct a 400 seed germination test  and obtain the following results for the four replicates of 100 seeds:
The average is 93.5. We enter 4 (# of test or replicates s); 100 (#of seed/test or replicate); and 93.5 (Average germination) into the calculator.  The Reported germination is 94 and the Maximum range is calculated by the worksheet as 10.Since the maximum difference between replicate results is 17 the results are out tolerance.  

C.   If we conduct  two 400 seed germination tests on a sample in the same lab and obtain the following results for the 2 tests:
The average is 96.5.  We enter 2 (# of tests or replicates); 400 (#of seed/test or replicate); and 96.5 (Average germination) into the calculator.  The Reported germination is 97 and the Maximum range is calculated by the worksheet as 3. Since the maximum difference between the test results is 5 the results are out tolerance.  

D.   If we conduct  three 400 seed germination tests on a sample in the same lab and obtain the following results for the 3 tests:
The average is 96.33.  We enter 3 (# of tests or replicates); 400 (#of seed/test or replicate); and 96.33 (Average germination) into the calculator.  The Reported germination is 96 and the Maximum range is calculated by the worksheet as 4. Since the maximum difference between test results is 5 the results of the tests are out of tolerance.  

E.  When using the tool to calculate the tolerance for 2 replicates of 50 seeds in a 100 seed test, the replicates of 50 seeds are expressed as a percentage before one uses the calculator.  If you do a 100 seed test in 2 replicates of 50 and get the following result:
To test the tolerance the results of the two reps are expressed as percentages:
The average is 85.  We enter 2 (# of tests or replicates); 50 (#of seed/test or replicate); and 85 (Average germination) into the calculator.  The Reported germination is 85 and the Maximum range is calculated by the worksheet as 16. Since the maximum difference between replicate results (expressed as a percentage) is 10 the results are in tolerance.  
 
Worksheet 2: Germ Tol - different labs

Tables giving tolerances for tests conducted in different labs are not required in the Rules, however, for statutory purposes one often wants to compare the results from different labs.  Also when conducting comparative tests there is sometimes the requirement to assess whether the results are in tolerance.  The worksheet should be used for the calculation of tolerances for repeat  tests carried out in different laboratories (up to ten). To use the worksheet enter the number of tests, the number of seed per test and the average germination which will be rounded down automatically  to the nearest whole number for values below x.5 and rounded up automatically for values above or equal to x.5.   

For example:  

A.  If we conduct a 400 seed germination test  in one lab and repeat the analysis in another laboratory and get the following results:
The average is 81. 5. .  We enter 2 (# of tests); 400 (#of seed/tests); and 81.5 (Average germination) into the calculator.  The Reported germination is 82 and the Maximum range is calculated by the worksheet as 9. Since the difference between the lab results is 7, the results of the two labs are in tolerance.  


B.  If we conduct a 200 seed germination test  in one lab and repeat the analysis in another laboratory and get the following results:
The average is 88.   We enter 2 (# of tests); 200 (#of seed/tests); and 88 (Average germination) into the calculator.  The Reported germination is 88 and the Maximum range is calculated by the worksheet as 10 Since the difference between the lab results is 20, the results of the two labs are out of tolerance.  


C.  If we conduct a comparative germination test on a sample of seed and there are 8 participating labs each carrying out a 400 seed germination test and get the following results:
The average is 91.875.   We enter We enter 8 (# of tests); 400 (#of seed/tests); and 91.875  (Average germination) into the calculator.  The Reported germination is 92 and the Maximum range is calculated by the worksheet as 9
Since the difference between the lab results is 10, the results of the labs are out of tolerance.  


Worksheet 3: CI for Germ
 

Tables giving confidence intervals for specific germination results are not required in the Rules, however, often customers ask for this information and labs find this information useful when explaining the meaning of results to their customers and the need for testing a specific number of seeds.  To use the worksheet enter the number of seed tested, the level of confidence required, and the average germination,  which will be rounded down automatically  to the nearest whole number for values below x.5 and rounded up automatically for values above or equal to x.5. 
  1. The 95% confidence interval is required for a germination of 80% on 100 seeds.  We enter 100 (# number of seeds in sample tested); 95%  (Level of confidence (%)); and 80  (Average germination) into the calculator.  The Reported germination is 80 and the Confidence Interval is calculated by the worksheet as 71 – 87.
  2.   The 99% confidence interval is required for a germination of 80% on 100 seeds.  We enter 100 (# number of seeds in sample tested); 99% (Level of confidence (%)); and 80 (Average germination) into the calculator.  The Reported germination is 80 and the Confidence Interval is calculated by the worksheet as 68 – 89. 
  3.   The 95% confidence interval is required for a germination of 79.5% on 400 seeds.  We enter 100 (# number of seeds in sample tested); 95% (Level of confidence (%)); and 79.5 (Average germination) into the calculator.  The Reported germination is 80 and the Confidence Interval is calculated by the worksheet as 76 – 84.
  4.   The 95% confidence interval is required for a germination of 80% on 1,000 seeds.  We enter 100 (# number of seeds in sample tested); 95% (Level of confidence (%)); and 80 (Average germination) into the calculator.  The Reported germination is 80 and the Confidence Interval is calculated by the worksheet as 77 – 82.
  5.   The 95% confidence interval is required for a germination of 94.25% on 400 seeds.  We enter 400 (# number of seeds in sample tested); 95% (Level of confidence (%)); and 94.25 (Average germination) into the calculator.  The Reported germination is 94 and the Confidence Interval is calculated by the worksheet as 91 – 96. 
             
  Download the tolerances calculation programme
(44 KB)

People involved in the project
Jean-Louis Laffont, Ronald Don, Germination Committee Members


Germination: Calculation and expression of results  

Presentation of the Calculator that can be used to determine the germination result that should be reported

The following Excel file contains a computer programme that calculates: the result that should be reported after testing the germination of a seed lot.  The programme will inform the user whether a result can be reported or whether a retest is required.  When retests are carried out the programme determines the result that should be reported or whether a further retest is required.  

The calculations carried out by this programme are in accordance with those developed and published by Miles 1963 in the “Handbook of tolerances and measures of precision for seed testingProceedings of the International Seed Testing Association, 28, 525-686.  
 
  Download the description of the programme
(311 KB)
  Download the germination result calculation programme (Excel 97-2003) (57 KB)
  Download the germination result calculation programme (Excel 2007) (23 KB)


People involved in the project:

Jean-Louis Laffont, Ronald Don, Sylvie Ducournau

 


Rules 2017 now available online



 
More info »


Latest issue of Seed Testing International



STI 152 October 2016
More info »


AOSA/SCST/ISTA Annual Meeting 2017 Registration is open!

Denver, Colorado, USA 19-22 June 2017

More info »


Follow ISTA on